6
.
Filter replacement
When one of the filters is almost full and has to be cleaned or replaced, the
appropriate filter replacement light starts to flash.
Filter replacement light 1 flashes: filter 2(charcoal filter) has to be replaced.
Filter replacement light 2 flashes: filter 3 (activated carbon filter) has to be
replaced.
Filter replacement light 3 flashes: filter 4 (HEPA filter) has to be replaced.
6.1 How to replacing the Charcoal filter, Activated carbon filter
and HEPA filter?
Tip:
Place the appliance against a wall for more stability when you remove or
insert filters.
1) Switch off the appliance and unplug it. (a)
2) Place your fingers on the sign
of back
cover at both sides, press down and open the
back cover. Then lift the hooks at the bottom
of the cover out of the bottom of the appliance.
Then lift the hooks at the bottom of the cover
out of the bottom of the appliance. (b)
3) To remove filter 1 (pre-filter), grab the two
projections at the top and pull the filter towards
you. (c)
4) To remove the filter 2 (charcoal filter) which
fixed by velcro with filter 3, just tear it off and
replace the new charcoal filter. (d)
10
( c )
( b )
( a )
( d )
Summary of Contents for VK-6010
Page 1: ...VK 6010 User Manual...
