ENGLISH
7
Preparation
Your appliance is provided with a dust bag. The
appliance is ready for use when all parts are
installed together.
1__
Insert the flexible hose
Q
with the flexible
contact into the inlet on the main body of the
appliance until it latches in.
Note
■
To remove the flexible hose
Q
press the side
release buttons buttons on the flexible hose
adapter
D
and then pull out the hose.
2__
Insert the end of the flexible hose to the metal
telescopic tube
C
.
Note
■
To adjust the length of the metal telescopic
tube
C
, push and hold the height setting
switch
E
and slide the tube out or in as
required. Release the height setting switch
E
and make sure that the tube clicks into place.
3__
Insert the multi-floor brush or crevice tool into
the lower end of the metal telescopic tube
C
.
Note
■
Install all snap-on elements by pushing and
rotating to each other and remove them by
pulling and rotating.
Usage_of_multi-floor_brush_in_two_
different_positions
Brush part shall be out while cleaning hard
surfaces and parquet floors.
Brush part shall be inside while cleaning carpets
and rugs.
Crevice_tool
This accessory is suitable for removing dust
from bookcases, curtains, window frames and
upholstered furniture.
OPERATION
________________________________________
