Varixx UMS 4200
Allgemeiner Teil / General Section
GRUNDIG Service
1 - 7
P
Q
R
Fig. 13
6. Cassetten-Laufwerk ausbauen
- Gehäuse zerlegen (Pkt. 1).
- 4 Schrauben
P
(Fig. 13) herausdrehen.
- Cassettenfach öffnen und Laufwerk herausnehmen.
- Stecker nach Bedarf abziehen.
7. Display- und Frontblatte ausbauen
- Oberteil abnehmen (Pkt. 4).
- 9 Schrauben
Q
(Fig. 14) herausdrehen.
- Display und Frontplatte herausnehmen.
- Stecker nach Bedarf abziehen.
- 4 Schrauben
R
(Fig. 15) herausschrauben.
- Die Front-Platte und die Display-Platte lassen sich jetzt auseinander
klappen (Fig. 16).
8. Kabelverlegung
- Nach erfolgter Reparatur ist es notwendig, die Leitungsführung
wieder in den werkseitigen Zustand zu versetzen um evtl. spätere
Ausfälle oder Störungen zu vermeiden (Fig. 17).
6. Removing Cassette Drive
- Disassemble cabinet (para 1).
- Undo 4 screws
P
(Fig. 13).
- Open cassette compartment and take out the cassette drive.
- Unplug connectors if necessary.
7. Removing the Display and the Front Board
- Remove top cover (para 4).
- Undo 9 screws
Q
(Fig. 14).
- Take out the front and the display board.
- Unplug connectors if necessary.
- Undo 4 screws R (Fig. 15).
- The front board and the display board can now be spread apart
(Fig. 16).
8. Wiring
- On completion of the repairs the leads must be laid out as originally
fitted at the factory to avoid later failures or disturbances (Fig. 17).
Fig. 14
Fig. 15
Fig. 16
Fig. 17