7.4.2 Group of Commands for Reading the Unit Settings
“FCE?”
reading the set measuring function
“GATE?”
reading the set measuring time
“ATT?”
reading the setting of the input voltage divider
7.4.3 Group of Commands for Setting the Unit Functions
“CHECK”
setting of the unit for the operation test
“FREQA”
frequency measurement on channel A
“FREQC”
frequency measurement on channel C
“PERA”
period length measurement on channel A
“TOTA”
simple pulse counting on channel A
“CHECK?”
single test of unit operation and transmission of the measuring result
“FREQA?”
frequency measurement on channel A and transmission of the measuring result
“FREQC?”
frequency measurement on channel C and transmission of the measuring result
“PERA?”
period length measurement on channel A and transmission of the measuring
result
“TOTA?”
simple pulse counting on channel A and transmission of the measuring result
7.4.4 Group of Commands for Setting the Measurement Parameters
“GATE:”
setting of the measuring time on the counter
This command is followed by the printout “GT:” and the following
“parameter” (measuring times) are displayed for selection:
“10US” (10 µs), “100US” (100 µs), “1MS” (1 ms), “10MS” (10 ms), “100MS”
(100 ms), “1S” ( 1 s), “10S” ( 10 s).
“ATT:”
setting of the input voltage divider ratio
This command is followed by the printout “ATT:” and the following
parameters (divider ratios) are displayed for selection:
“1” (1:1), “10” (10:1).
19
Operating Instructions UZ 2400
1/2000
