Settings
k
6
❒
Limiting channel position selection
The ATS feature stores all channels it has found
and automatically blocks the first position to which
no program is assigned (
the point of reversal
).
That means when you use the
p
or
P
buttons, you
can choose only the channels that have been auto-
matically assigned.
This feature can also be manually defined. In the
following example, every channel from position 6
onwards will be “blocked”.
Press the
h
and then the
G
button.
The page »DIALOG CENTER« will appear.
Select the »MANUAL TUNING« line using
p
or
P
and confirm with
G
.
On the »MANUAL TUNING« page, choose channel
position 6 with the
F
or
E
buttons.
Choose the line »C/S« and use the buttons
F
or
E
to choose »Channel« (or frequency, despending on
the preselection made in the »ADJUST COUNTRY«
menu, see page 5).
Choose the »Channel« (or frequency) line and use
the digit buttons
0
…
9
to input two zeros »00«
(at frequency 000).
Save the setting with
G
and end the operation
with
¢
TXT
.
The first 5 channels can now be scrolled through in
quicker succession as the subsequent channels can
no longer be selected using the
p
and
P
buttons.
All single digit channel positions are still accessible
using the digit buttons
0
…
9
.
If 11 is blocked as the channel position, all subse-
quent channel positions can be selected with the
digit buttons
0
…
9
.
Setting channels manually
Press the
h
and then the
G
button.
The page »DIALOG CENTER« will appear.
Choose the »MANUAL TUNING« line with the
p
or
P
buttons and confirm with
G
.
2
1
6
5
4
3
2
1
Entering channels directly
Select the channel position with the digit buttons
0
…
9
or with the
F
or
E
buttons.
Select the line »C/S« with the
p
or
P
buttons.
Using
F
or
E
, select »Channel« or »Special chan-
nel«.
Select the »Kanal« line using the
p
or
P
button.
Enter the desired channel number (or frequency,
despending on the preselection made in the
»ADJUST COUNTRY« menu, see page 5) using the
numbered buttons
0
…
9
or the
F E
buttons.
Select the line »Standard« using
p
or
P
.
Using
F
or
E
select the required setting.
Fine-tune the picture. Select the »Finetun.« line
using
p
or
P
.
Adjust the fine-tuning using
F
or
E
.
Save setting with the
G
button.
To set more channels, repeat the steps starting with
point .
End setting with the
¢
TXT
button.
Automatic search
Select the »Channel« line using
p
or
P
.
Start the automatic station search with the »blue«
o
button.
Select the »Program« line using
p
or
P
. Select the
position where you would like to store the channel
with
0
…
9
(01 – 99).
The colour and sound norms will be automatically
set.
Fine-tune the picture. Select the »Finetun.« line
using
p
or
P
.
The fine-tuning with
F
or
E
.
Save settings with
G
.
To set further channels, repeat steps starting with
point .
Exit settings using the
¢
TXT
button.
6
1
6
5
4
6
3
2
1
7
1
6
6
5
4
3
2
1
MANUAL TUNING
66
OK Memorize 0 – 9
TXT
Program
r
01
e
C/S
Channel
Channel
C 34
Finetun.
00
Standard
automatic
