Convenience functions
k
13
Special functions
The following settings are adjusted with the
»DIALOG CENTER«.
Call up the »DIALOG CENTER« with the
h
and
G
buttons.
To exit the following settings, use the
¢
TXT
button.
❒
Switch on with ...
When you frequently use the set as an AV monitor
(e.g. together with a camera as a monitoring
system or with a satellite receiver), this function
can give priority to the channel position.
When switching on the set with the main power
button, instead of automatically showing the »P 1«
channel position, »AV« is shown.
Select the line »SPECIAL FUNCTIONS« from the
»DIALOG CENTER« with the
p
or
P
button and
confirm with
G
.
Select the »TV on with« line and use
F
or
E
to
designate the desired channel position (»Prog 1« or
»AV«).
❒
Picture and sound settings
Scales appear on the screen for the adjustment of
volume, brightness and colour contrast. The dis-
play of on-screen scales can also be averted:
Select the »SPECIAL FUNCTIONS« line from the
»DIALOG CENTER« with the
p
or
P
button and
confirm with
G
.
Select the line »Pic./sound opt.« and, using
F
or
E
, select »off«.
❒
Equalizing the volume
The volume of normal TV broadcasts and commer-
cials may be different. You may equalize this vol-
ume fluctuation.
Select the »SPECIAL FUNCTIONS« line from the
»DIALOG CENTER« with the
p
or
P
button and
confirm with
G
.
Select the line »Volume Limiter« and, using
F
or
E
, select »on«.
❒
Decoder on/off
If a decoder (descrambler) has been connected to
receive a particular channel, the indication for
»Decoder« must be turned »on« for each corre-
sponding channel position.
For setting operation with decoder,
see page 16.
1
2
1
2
1
2
1
6
6
❒
Station name (SERVICE function)
Some broadcasting stations broadcast their station
name. This is briefly displayed when changing the
channel position. You may switch this display off.
Select the line »SERVICE« from the »DIALOG
CENTER« with the
p
or
P
button and confirm with
G
.
Select the line »Station name« and, using
F
or
E
,
select »off«.
Now when changing channel position, only the
channel position number is displayed.
❒
Setting Sleep Timer
With the »SLEEP TIMER« menu, you can input a
switch-off time for your set. The set switches to
standby after the set time has elapsed.
Select the »SLEEP TIMER« line from the »DIALOG
CENTER« with the
p
or
P
button and confirm with
G
.
The menu »SLEEP TIMER« will appear.
Using the digit buttons
0
…
9
input the desired
switch-off time with two digits (from 01 to 99 min).
With the
-
button, the set switch-off time can be
deleted.
To exit, use the
¢
TXT
button.
Superimposing channel number
w
!
You always can always display the channel position
number.
Press
h
and wait until the »OK DIALOGCENTER«
display disappears.
The channel position number will now be shown
continuously.
To deactivate this function, press
h
twice.
2
1
5
4
3
2
1
2
1
SLEEP TIMER
66
0 – 9
TXT
´
– –
´
min.
