ENGLISH
23
Setting alarm time and type
You can enter two different alarm times and select between two different
alarm types.
Setting the alarm time
1
Enter the first alarm time by pressing and holding down the
»
ALARM 1
« button.
– Display: the set alarm time and »
A 1
«.
2
Set the desired alarm time with »
+
« or »
–
« (
TUNING
).
3
Release »
ALARM 1
«.
Note:
Repeat procedure for the second alarm time with »
ALARM 2
«.
Alarm with radio station
1
Switch on device with »
ON/OFF
«.
2
Select channel position with the »
1 ... 10
« buttons, adjust volume to
the desired level with »
VOLUME
«.
3
Switch off device with »
ON/OFF
«.
4
Activate the first alarm time by pressing »
ALARM 1
« until »
¤
1
«
appears in the display.
– The device switches to alarm time 1 and switches off again after
90 minutes.
– While the alarm sounds, »
¤
1
« flashes in the display.
Note:
Repeat procedure for the second alarm time with »
ALARM 2
«.
Alarm with signal tone
Your device is equipped with a dynamic signal tone; this means the volume
of the signal tone becomes increasingly louder as it sounds.
1
Switch off device with »
ON/OFF
«.
2
Activate first alarm time by pressing »
ALARM 1
« until »
e
1
« appears
in the display.
– The device switches to alarm time 1; the signal tone becomes increa-
singly loud. The signal tone is switched off after a maximum of
90 minutes.
– While the alarm sounds, »
e
1
« flashes in the display.
Note:
Repeat procedure for the second alarm time with »
ALARM 2
«.
The signal tones for alarm time 1 and alarm time 2 are different.
ALARM MODE
______________________________________
6: 00 a i
´
6: 3 0 a i
´
6: 3 0 a i
¤
1
´
f
BAYER N 3
FM
´
6: 3 0 a i
e
e
1
´
