background image

15

ENGLISH

SAFETY AND SET-UP ______________________

7

7

Do not pull on the power cord when 

disconnecting the plug from the power outlet. 

Do not wrap the power cord around the 

device.

7

7

Using an extension cord with this device is not 

recommended.

7

7

Do not immerse the appliance, power cord or 

power plug in water or in other liquids.

7

7

Clean the appliance with damp cloth only

7

7

Do not stick any foreign objects inside of the 

outer casing.

7

7

Care shall be taken when handling the sharp 

cutting blades, emptying the bowl and during 

cleaning.

7

7

Remove the attachments prior to cleaning.

7

7

The blades, slicers and shredders are very 

sharp! To avoid injury, handle with the utmost 

care, especially when removing and cleaning 

them. Do not touch them with your bare 

hands.

7

7

Do not touch any moving parts on this device. 

Wait until it has come to a complete standstill. 

7

7

Always a spatula should be used to remove 

food from the container. To do this, the device 

must be switched off.

7

7

The attachments must be properly installed 

and containers locked into place prior to 

switching on this device.

7

7

Only lift the cover once the moving parts 

have come to a complete standstill.

7

7

Remove the cutting tools before removing any 

food.

7

7

Should food particles still remain in the filler 

hole, do not try to remove them with your 

finger, but rather use the stopper or another 

piece of food. Should a piece of food be 

difficult to remove, then switch off the device, 

unplug it from the power supply and take it 

apart. 

7

7

Prior to changing the attachments, make sure 

the device is switched off and unplugged.

7

7

Risk of injury! Extreme caution is advised 

when handling the blades in order to avoid 

serious cut wounds.

7

7

To guarantee the safety of the device, do not 

alter the safety features in any way.

7

7

Always make sure that the jug is sitting 

correctly and is locked into place.

7

7

Before the jug is taken off the motor unit, 

always wait until the motor has come to a 

standstill.

7

7

Never operate this device without a cover.

7

7

Danger of burns! Do not fill the jug with hot 

liquids.

7

7

Never operate this device when it is empty.

7

7

This device is only intended for short periods 

of use and should only be in continuous use 

for a maximum of 3 minutes. After use, let the 

device cool down sufficiently.

7

7

Remove bones from the meat and stones from 

fruit to prevent the blades or the device from 

becoming damaged. Do not put especially 

hard foods into the device.

7

7

Do not crush big pieces of ice cubes with the 

device, crush only small ice cubes.

Summary of Contents for SM 5040














Reviews: