19
ENGLISH
Preparation
1
Place the device on an even and dry surface.
The non-slip feet
L
ensure the stability of the
device.
2
Make sure that the power cord is disconnected
from the power supply and the control dial
K
is on O before putting food into the glass jug.
3
Take the glass jug
E
off from the motor unit
by lifting the glass jug upwards ( do not try to
rotate it, see diag.) and open the lid.
P 0
4
Now put the items to be blended in the
glassjug. The ingredients should only be
about 2-5 cm long.
Notes
7
7
The maximum filling quantity is 1.5 l. The
filling quantity is indicated on the glass jug
in litres from 0.5-1.5 LTR and in ounces from
20-50 OZ.
7
7
Add water to ensure the jug blender functions
smoothly. The mixing ratio between hard
foods and water is usually 2:3.
OPERATION ______________________________
Caution
7
7
Do not put or blend hot foods or liquids in
the glass jug. Please note, if you processing
soups, the liquid temperature should not ex-
ceed 40°C.
7
7
To process crushed ice, we suggest you start
with threequaters of ice into the jug and add
15 ml of cold potable water.
7
7
Don´t try to crush ice without adding water to
the jug.
7
7
Never let the jug blender operate while empty
(without food). Danger of overheating!
7
7
Never let the jug blender operate without the
glass jug on the motor housing.
5
Close the lid. Make sure that the cap/
measuring cup is inside the lid opening and is
secured.
6
Place the glass jug upright onto the motor unit.
The white line with arrow on the base of the
jug must be located under the white arrow on
the motor.
Caution
7
7
Never move or turn the glass jug after it is
properly located in the place.
