24 ENGLISH
OPERATION _________________________________
Water spray
1
Make sure there is sufficient water in the
water tank. Spray function can be used in
order to remove tenacious creases by press-
ing the spray button
E
during dry or steam
ironing.
Lime removing feature
(Self-Clean)
It minimizes the lime particles accumulated in
the steam reservoir of your iron.
Use the self-clean feature once in every 2 to 3
weeks. If the water in your region is very hard (if
lime particles fall down from the soleplate of the
appliance), we recommend to use the self-clean
function more frequently.
1
Unplug your iron.
2
Fill in the water tank up to MAX level.
3
Push the steam adjustment knob to the “0”
position.
4
Plug in the appliance to a grounded wall
socket and set the temperature setting dial
to MAX.
5
Unplug the iron when the thermostat warning
light
J
turns off.
6
Hold the iron over the sink, press and hold
the self clean button
C
and gently shake
the iron. During this process, the water in
the water tank comes down into the steam
generation reservoir quickly and is released
through the soleplate holes along with the
lime particles (if any).
7
When the entire amount of water is dis-
charged from the tank, release the self clean
button
C
. If the iron still contains impurities,
repeat this process.
8
After the lime removal process is completed;
plug in the iron and make sure that the iron
soleplate is heated. When the iron reaches to
the adjusted ironing temperature, unplug the
appliance and gently iron on an old cloth.
Keep ironing until the water and lime stains
left on the soleplate are removed. Wait until
the iron cools down before storing it.
Caution
7
Do not add vinegar etc. and other lime remov-
ing substances into the water tank.
Lime protection system
(Anti-Calc)
The lime protection system in the water tank of
your iron prevents clogging of the steam holes.
Lime protection system is always active and there
is no need to replace it.
