ENGLISH
24
TAPE MODE
-----------------------------------------------------------------------------------------------------
Selecting the tape input source
1
Move the »
CD TAPE/OFF RADIO
«
switch to the »
TAPE
« position.
2
Press »
7
.
« to open the tape compartment.
3
Insert a tape in the compartment with the
open side facing up and the full reel on the
right side.
4
Close the tape compartment.
Tape playback
1
Press »
r
« to start playback.
– Playback ends at the end of the side of the
cassette.
2
Press »
II
« to pause playback.
Press »
II
« to resume playback.
3
End playback by pressing »
7
.
«.
4
Press »
7
.
« again to open the tape com-
partment and take out the cassette.
Fast forward and rewind
1
Press »
rr
« or »
ee
« when the tape is in
the stop position.
– »
rr
« fast forwards to the end of the
tape, »
ee
« rewinds to the beginning of
the tape.
2
Press »
7
.
« at the required position on the
tape.
Tape recording
Erase protection
Every new recording overwrites the existing re-
cording on the tape.
You can protect your own tapes against acciden-
tal erasure by breaking the safety tabs on the
top of the tape.
Pre-recorded commercial music tapes are al-
ready protected against accidental erasure.
If you want to record on to a protected tape,
cover the opening with adhesive tape.
Notes:
7
Only use NORMAL-type cassettes (IEC I)
for recording. CHROME (IEC II) or METAL
(IEC IV) tapes are not suitable.
7
The Ultra Bass System does not affect re-
cording.
Recording from the radio
1
Put in a cassette with the protection tabs in-
tact and press »
rr
« or »
ee
« to find the
position on the tape.
2
Move the »
CD TAPE/OFF RADIO
«
switch to the »
RADIO
« position and select
the radio station.
3
Press »
« to start recording.
– The »
r
« button is automatically engaged.
– The device automatically stops recording
at the end of the tape.
4
Press »
II
« to pause recording.
Press »
II
« to resume recording.
5
To break off recording, press »
7
.
«.
