23
ENGLISH
CD MODE
------------------------------------------------------------------------------------------------------------
Changing the track selection
1
In stop mode, keep pressing »
PROG.
« until
the number of the track you want to replace
appears in the display.
2
Select the number of the new track by
pressing »
SKIP
« or »
SKIP
«.
3
Press »
PROG.
« to save the new track.
Adding tracks
1
In stop mode, keep pressing »
PROG.
« until
the track number shown in the display is
zero.
2
Select the number of the new track by
pressing »
SKIP
« or »
SKIP
«.
3
Press »
PROG.
« to save the new track.
Deleting the track memory
The CD must be in the stop position.
1
Press »
OPEN/CLOSE
« to open the CD
compartment;
or
press »
CD TAPE/OFF RADIO
« to
switch the device to »
RADIO
« or press
»
CD TAPE/OFF RADIO
« to switch the
device to »
TAPE/OFF
«.
Repeating a track (Repeat One)
1
During playback, press »
MODE
« once.
– The current track is repeated.
2
To quit the function, press »
MODE
« twice.
Repeating all tracks (Repeat All)
1
During playback, press »
MODE
« twice.
– The whole CD is played back repeatedly.
2
To end this function, press »
MODE
« once.
Creating a track memory
You can store up to 20 tracks of the current CD
in a particular order and then play them back. A
track may be stored more than once.
Programming is only possible in the stop position.
Selecting and storing tracks
1
Press »
PROG.
« to call up the function.
– Display: »
0 I
« for the track selection and
»
PROG.
•
« flash.
2
Select the track by pressing » « or » «.
3
Press »
PROG.
« to save the track.
– The new memory position is briefly dis-
played, then »
02
« for the track selection
and »
PROG.
•
« flash.
4
To store more tracks, repeat steps
2
to
3
.
Playing back a track memory
1
Start the track memory by pressing
»
PLAY/PAUSE
e
II
«.
– Playback begins with the first programmed
track.
2
Press »
STOP
7
« to end playback.
3
To play the track memory again, press
»
PROG.
« and afterwards
»
PLAY/PAUSE
e
«.
