![Grundig RRCD 1200 Manual Download Page 10](http://html1.mh-extra.com/html/grundig/rrcd-1200/rrcd-1200_manual_2273644010.webp)
ENGLISH
22
The device is suitable for
music CDs displaying the
logo shown here (CD-DA)
and for CD-Rs and CD-
RWs with audio data.
When burning CD-R and CD-RWs with audio
files, various problems may arise which could
lead to interference in playback. This can
be caused by faulty software or hardware
settings or by the CD being used. Should
such problems arise, contact the customer
services of your CD burner or software manufac-
turer or look for relevant information, for exam-
ple on the Internet. When you are making audio
CDs, observe all legal guidelines and ensure
that the copyright of third parties is not infringed.
Always keep the CD compartment closed to
prevent dust from collecting on the laser optics.
Do not attach adhesive labels to CDs. Keep the
surfaces of CDs clean. You can play standard
12 cm CDs as well as 8 cm CDs on your device.
An adapter is not necessary.
Selecting the CD input source
1
Move the »
CD TAPE/OFF RADIO
«
switch to the »
CD
« position.
2
Press »
OPEN
« to open the CD compart-
ment.
3
Insert a CD in the compartment with its label
facing upwards.
4
Close the lid of the CD compartment.
– The device reads the content of the
CD. The display shows the number of
tracks.
CD MODE
------------------------------------------------------------------------------------------------------------
CD playback
1
Press »
PLAY/PAUSE
e
II
« to start play-
back.
– Playback begins with the first track.
– Display: the current track number.
– Playback stops at the end of the CD.
2
Press »
PLAY/PAUSE
e
II
« to pause play-
back.
3
Press »
PLAY/PAUSE
e
II
« to resume play-
back.
4
Press »
STOP
7
« to end playback.
5
Press »
OPEN
« to open the CD compart-
ment and take out the CD.
6
Close the CD compartment.
Repeating the current track
1
Press »
SKIP
« briefly during playback.
– The track is repeated from the beginning.
Selecting another track
1
During playback, keep pressing »
SKIP
«
or »
SKIP
« until the number of the track
you want to hear appears in the display.
– Playback of the selected track starts auto-
matically.
Note:
7
You can also select tracks in the stop posi-
tion. However, you must then start playbac
of the track with »
PLAY/PAUSE
e
II
«.
Searching for a passage within a
track
1
During playback, press »
SKIP
« or
»
SKIP
« and hold it down until you find
the passage you want to hear.
– Playback starts when you release
»
SKIP
« or »
SKIP
«.
Note:
7
During the search the volume is reduced.