ENGLISH
5
PREPARATIONS
__________________________________________________________________________
Putting batteries into the remote control
1
Open the batery compartment (pull off cover).
2
Insert the batteries (Micro type, e.g. R03P, 3 x 1.5 V).
Observe the polarity when inserting the batteries.
Note:
If your TV set does not react to the remote control commands correctly, then
the batteries could be used up. Remove empty batteries. There is no
liability for damage caused by leaking batteries.
Preparing the remote control for additional appliances
In order to use the remote control with the DVD player and a Grundig video
recorder, a code number must be entered.
1
Press and hold down the »
Mode
« button.
2
Use the »
1...0
« buttons to enter the code number.
– The remote control now is prepared for the operation with the additional
appliance.
Appliance
DVD player* Video recorder
Factory setting (reset)
Code no.
4 2 4
2 3 8
8 5 9
* Already entered in the factory
