Connecting a video recorder or satellite receiver
r
Connection
Connect the video recorder or satellite receiver with an AV cable to the AV
socket at the back of the set.
r
Operation of each connected device
Starts video cassette recorder playback function or switches on satellite
receiver.
When connecting a decoder (descrambler), pay attention to the chapter on
page 8: » Manual setting of program positions. «
In the menu, the “ON” setting must be used at the corresponding program
position under »
DEC
«.
Connecting external loudspeakers
r
Connection
Connect loudspeaker (min. 8 ohms nominal impedance) to the loudspeaker
socket (at back of device).
Changing volume with the
–
ņ
,
+
ŀ
.
Ń
!
This unit conforms to VDE safety regulations and directives of the Deutsche
Bundespost (German Federal Post Office; see certification mark on the type
sticker on the rear of the unit), as well as all relevant ordinances governing
X-ray emissions. The picture tube, which emits X-rays, is sufficiently shiel-
ded and therefore represents no danger. Accelerating voltage is max. 25 kV
with a mean beam current of 0,8 mA.
Unauthorized tampering with the unit, in particular making adjustments to
the high voltage system, or installing a different picture tube, can consider-
ably increase X-ray emissions. Units so altered no longer conform to appli-
cable safety regulations and may not be operated.
220-240V, 50/60Hz (power supply control range 165 – 265V)
Power consumption approx. 40 W; in standby 11 W.
Sound output: 2 W music power (1 W sine power).
The mains cable is a plug-in model. Please give order no. 8290-991-220 to
customer service if a replacement is needed.
Subject to alterations. E. and O.E.
2
1
1
1
Connection Possibilities
ķ
11
