Assigning Programme Positions
1st possibility
r
The Automatic Tuning System ATS
This automatic tuning system scans the entire reception range and auto-
matically stores all found programmes.
How to proceed:
Switch the TV set on from standby with one of the buttons
1...9
.
Press the
AUX
button for approx. 4 sec. until the ATS menu appears.
Start the tuning system with the
OK
button.
The station search procedure may last one minute and longer.
When the station search is completed, the televsion is ready for operation.
Have a good time with your new television set!
If you are not satisfied with the automatic assignment of the programme
positions, you can change the order of the programmes stored in the
station positions according to your personal preferences.
r
Exchanging programme positions
Example: The channel stored in programme position 5 is to be moved to
programme position 2.
Select programme position 2.
Press the
AUX
button. The programme menu is displayed.
Under »
PR
«, enter the new programme position 05 with the buttons
1...9
.
Press the
OK
button. The procedure is completed.
Press the
i
button to return to TV mode.
2nd possibility
r
Assigning programme positions manually
Press the
AUX
button. The programme menu is displayed.
Under
»
PR
«
select the programme position to be assigned with the
P+/P-
button.
"
»
CH
«
enter the channel number (in the case of a special
channel, enter
»C
« instead of »
S
« with the
P+
button).
If the channel number 00 is entered on a programme
position, all further positions can no longer be selected
with the
P+
and
P-
buttons.
2
PR
CH
S
DEC
FT
22
S06
BG
ON
00
0…9
ɶɶʺʺ
ɼɦ
OK
i
1
5
4
3
2
1
3
2
1
ķ
8
ĵ
dialogue line
