Grundig MUSIC DG 8000 DAB+, Manual

Page: 24 / 144

ENGLISH 24
TIMER MODE
--------------------------------------------------------------------------------------------------------------------------
Notes:
7
The alarm function is only available during
mains operation, it is disabled during battery
use.
7
You can select directly the option » ALARM «
also with » MODE/AL « in standby mode.
Setting the alarm times
1
Press »
ON/OFF
« to switch on the device.
– Display: e.g. »
B5 AKT
«.
2 Open the menu with » MENU «.
3
Select the option »
SYSTEM
« with »
TUNING
«
and confirm by pressing »
SEL/ATS
«.
4 Select the option » ALARM « with » TUNING «
and confirm by pressing » SEL/ATS «.
– Display: » ALARM « flash.
5
Press »
SEL/ATS
«, select Timer On (»
ON
«) with
»
TUNING
« and confirm by pressing »
SEL/
ATS
«.
– Display: e.g. »
6 : 00 AM
«.
6 Set the hours with » TUNING « and confirm by
pressing » SEL/ATS «.
7
Set the minutes with »
TUNING
« and confirm
by pressing »
SEL/ATS
«.
8 Select the desired alarm mode (signal sound/
buzzer, DAB radio station or FM radio sta-
tion) with » TUNING « and confirm by pressing
» SEL/ATS «.
Note:
7
If DAB/ or FM program has been selected
as the alarm signal, a program must be se-
lected with » TUNING « and confirmed with
» SEL/ATS «.
9 Select the desired alarm day (Daily, Once,
Weekends or Weekdays) with » TUNING «.
Notes:
7
If the alarm is set to “Once“ continue with
step
10
.
7
Otherwise, end settings with step 13 .
10 Set the day with » TUNING « and confirm by
pressing » SEL/ATS «.
11 Set the month with » TUNING « and confirm
by pressing » SEL/ATS «.
12
Set the year with »
TUNING
«.
13 Press » SEL/ATS « to end the setting.
– Display: »
SAVED
«.
Interrupting the alarm
1 Press » SNOOZE « while the alarm is sounding.
– Display: » e « or » § « flash.
– The alarm (signal tone or radio) stops.
– The alarm goes on again in 5-minute inter-
vals (the total alarm time is 90 minutes).
Cancelling alarm stand-by
1
Press »
ON/OFF
« while the alarm is sounding.
– Display: the current time and » e « or »
§
«.
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
next day at the same time.
Activating and deactivating the
alarm
1
Press »
ON/OFF
« to switch off the device.
2 Press » MODE/AL « to deactivate the alarm
stand-by.
– Display: »
OFF
« and » e « or » § « disap-
pears.
– The set alarm time is saved
3
Press »
MODE/AL
« to reactivate the alarm
stand-by.
– Display: »
ON
« and » e « or »
§
«.