Grundig MUSIC DG 8000 DAB+, Manual

Page: 21 / 144

21 ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Programming FM radio stations –
manually
1
Select the input source FM with »
MODE/AL
«.
2 Press and hold down » SEL/ATS « to start the
automatic station search.
– The automatic station search starts, and stops
at the next station with a strong signal;
or
turn » TUNING « until you have found the
frequency you want.
– The frequency changes in steps of 50 kHz.
3
To store the FM radio station on a preset, press
and hold down the required preset button
»
1
/
6
« to »
5
/
10
«, until »
STORED
« appears.
Press »
+5
« and the required preset button
»
1
/
6
« to »
5
/
10
« for presets 6 to 10.
Note:
7
The device normally scans for FM radio
stations which are strong enough to get
good reception. To scan radio stations with
weak signal:
Open the menu »
SCAN
« with » MENU « and
confirm with » SEL/ATS «.
Select the option »
DX
« with » TUNING «
and confirm by pressing » SEL/ATS «.
7
Switch back to normal sensitivity by repeat-
ing the setting and choosing the option
» LOCAL «.
Setting the clock format
(12 or 24 hours)
1 Press » ON/OFF « to switch on the device.
– Display: e.g. »
B5 AKT
«.
2
Open the menu with »
MENU
«.
3 Select the option »
SYSTEM
« with » TUNING «
and confirm by pressing » SEL/ATS «.
4
Select the option »
TIME
« with »
TUNING
« and
confirm by pressing »
SEL/ATS
«.
– Display: »
12/24 HR
«.
5 Press » SEL/ATS « again and select the desired
clock format (12 or 24 hours) by pressing
» TUNING «.
6
Press »
SEL/ATS
« to confirm the setting.
7 Press » MENU « to end the setting.
Updating the time – automatically
The device will normally update the time automat-
ically, when a time signal is received. You can
select from which source (DAB or FM) the update
starts or you can disable this function.
1
Press »
ON/OFF
« to switch on the device.
– Display: e.g. »
B5 AKT
«.
2 Open the menu with » MENU «.
3
Select the option »
SYSTEM
« with »
TUNING
«
and confirm by pressing »
SEL/ATS
«.
4 Select the option » TIME « with » TUNING « and
confirm by pressing » SEL/ATS «.
– Display: » 12/24 HR «.
5
Select the option »
UPDATE
« with »
TUNING
«
and confirm by pressing »
SEL/ATS
«.
– Display: »
ANY
«.
6 Select the desired option (Any, DAB or FM)
with » TUNING «; or select the option » NONE «,
if you want to disable the update.
7
Press »
SEL/ATS
« to confirm the setting.
8 Press » MENU « to end the setting.