Grundig MUSIC DG 8000 DAB+, Manual

Page: 23 / 144

23 ENGLISH
OPERATION
------------------------------------------------------------------------------------------------------------------------------
General functions
Switching on and off
1 Press » ON/OFF « to switch the device on and
off.
Adjusting the volume
1 Adjust the volume using » – «.
Adjusting the tone
1
Adjust the tone using »
!
"
«.
DAB mode
For the best DAB reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting the input source DAB
1 Select the input source DAB with » MODE/
AL «.
– Display: » DAB «, then the name of a DAB ra-
dio station.
Selecting stored stations
1 Select the station you want using the preset but-
tons » 1 / 6 « to » 5 / 10 « (presets 1 to 5) or using
» + 5 « and the preset buttons » 1 / 6 « to » 5 / 10 «
(presets 6 to 10);
or
select the desired station step by step by press-
ing » TUNING «.
Displaying DAB station information
1 To display information on the current DAB sta-
tion, press » INFO « repeatedly.
– The following display appears in succession:
Information from the provider (e.g. the title
of the song, the e-mail address), the signal
strength, the genre, the Ensemble (e.g. BR for
Bayern), the current frequency, reference to
signal interference (at optimum signal display
» ERR: 0 «) the bit rate, the broadcasting format,
the current time and date.
Setting Dynamic Range Control
(DRC) for DAB stations
When you activate Dynamic Range Control, you
can hear lower sounds better in a loud environ-
ment.
1 Open the menu with » MENU «.
2
Select the option »
DRC
« with »
TUNING
« and
confirm by pressing »
SEL/ATS
«.
– Display: »
DRC OFF
«.
3 Select the option “DRC LOW” or “DRC HIGH”
with » TUNING « and confirm by pressing
» SEL/ATS «.
4
Press »
MENU
« to end the display.
Note:
7
The DAB station must support DRC.
FM mode
For the best FM reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting the input source FM
1 Select the input source FM with » MODE/AL «.
– Display: »
FM
«, then the frequency of a FM
radio station.
Selecting stored stations
1 Select the station you want using the preset but-
tons » 1
/
6 « to » 5
/
10 « (presets 1 to 5) or using
» + 5 « and the preset buttons » 1
/
6 « to » 5
/
10 «
(presets 6 to 10).
Displaying RDS station informations
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
Notes:
7
It may take some time before all RDS infor-
mation is available.
7
GRUNDIG has no influence on the correct-
ness of such information.
1 Press » INFO « repeatedly.
– The following display appears in succesion:
The name of the radio station, radio text (if
offered), station type (PTY), the current time
and date.