background image

ENGLISH

3

SAFETY

_______________________________________________

Please note the following instructions
when using the appliance:

7

The appliance is designed for
domestic use only.

7

Observe these instructions in
order to prevent damage to the
appliance or danger arising from
improper use. Keep them in a
safe place.

7

Never use the appliance in the
bath, shower or over a wash
basin filled with water; nor should
it be operated with wet hands.

7

Do not immerse the appliance in
water or let it come into contact
with water, even during cleaning.

7

Do not drop the appliance.

7

Do not use the appliance near
water in bathtubs, wash basins or
other vessels.

7

Pull out the mains plug after use.

7

If the appliance is used in the
bathroom, it is essential that the
mains plug is pulled out after use,
as water close to the appliance
can still constitute a danger, even
if the appliance is switched off.

7

If not already present, for additio-
nal protection it is recommend to
install a residual-current-operated
protective device (RCD) with a
rated residual operating current
not exceeding 30 mA in the electri-
cal circuit of your bathroom. Ask
your plumber for advice. 

7

Keep the appliance away from
children.

7

The device may not be used by
the following people, including
children: those with limited
physical, sensory or mental
capabilities and also those with a
lack of experience and
knowledge. This does not apply
to the latter if they were instructed
in the use of the device or if they
use it under the supervision of a
person responsible for safety.
Children should always be super-
vised to ensure that they do not
play with the device.

7

Do not open the appliance under
any circumstances. No warranty
claims are accepted for damage
resulting from improper handling.

Summary of Contents for MC 7740













Reviews: