background image

ENGLISH

5

POWER SUPPLY

___________________________________

Operation with
rechargeable batteries

When operating the appliance with
the built-in nickel metal hydride
battery, only use the power unit
supplied for charging.

1

Plug the power cord into the 
socket and the power supply unit
into the socket.

Notes 

7

Charge up the batteries comple-
tely (24 hours) before you first
use them or if you have not used
them for a long time.
– The charge indicator 

lights up.

7

After the batteries are first
charged, the charging time is
approx. 12 hours when the
appliance is switched off. If you
switch on the appliance while it is
charging, charging will stop. 
– The charge indicator 

disappears. 

7

The ambient temperature should
be between 5 °C and 40 °C.

E

E

F

7

When fully charged, the appliance
works for around 45 minutes. It is
not advisable to charge the batter-
ies after every use, especially if
you do not use the appliance for
the full 30 minutes. Only charge
the batteries when they are com-
pletely discharged. This increases
their service life. Do not charge it
every day.

Using the charging unit
1

Plug the socket 

of the

appliance into the plug in the
charging unit.

2

Plug the power cord into the
socket on the charging unit.

3

Plug the power supply unit into
the wall socket.

F

Summary of Contents for MC 7740













Reviews: