40
Your radio recorder has a switch-on timer, which turns the device on and off
at a pre-set time.
Setting the switch-on timer
Note:
The clock on the device must already be set. If, when setting the time, no
button is pushed for a period of longer than 10 seconds, the system will
end the process automatically. You then have to start again at the begin-
ning.
1
In standby mode, press and briefly hold down »
TIMER
«.
– Display: »
w
« and »ON«, the hours display flashes.
2
Set the hours for the switch-on time with »
TUNING
Ń Ľ
« on the device.
3
Press »
TIMER
«.
– Display: »
w
« and »ON«, the minutes display flashes.
4
Set the minutes for the switch-on time with »
TUNING
Ń Ľ
« on the device.
5
Press »
TIMER
«.
– Display: »
w
« and »OFF«, the hours display flashes.
6
To enter the switch-off time, repeat steps
2
to
4
.
7
Press »
TIMER
«.
– Display: »
w
«, »CD« flashes.
8
Select the tuner or CD input source using »
TUNING
Ń Ľ
« on the device.
Note:
If you select CD, make sure that a CD has been inserted.
9
If you select tuner, select the desired station position with »
MEM
Ń Ľ
« on
the device or with »
5a
« and »
s6
« on the remote control.
10
Press »
TIMER
«.
11
Set the desired volume using »
–
«.
12
Finish the settings with »
TIMER
«.
Deactivating the switch-on timer
1
To deactivate the switch-on timer, press »
TIMER
« briefly in stand-by
mode.
– Display: »
w
« disappears.
– The switch-on timer for the next day is deactivated
or
Switch off the device while it is ready to switch on with »
ON/OFF
«.
– The switch-on timer remains activated for the next day.
TIMER MODE
________________________________________
0
:00
w
ON
7:
00
w
ON
0
:00
w
OFF
22
VOL.
w
7:20
w
CD
FLAT
CH
37
FM
100.6
MHz
ɳ
w
TUNER
