ENGLISH
33
Antennas
1
For FM stations (VHF) extend the telescopic antenna »
ANTENNA
8
«.
Note:
If the FM signal is too strong, it is advisable to push in the telescopic
antenna.
2
The radio recorder has a built-in rod antenna for MW and LW reception.
Turn the radio recorder to point the antenna.
Selecting the tuner as the source
1
Select the input source using the »
TUNER/BAND
« button.
– The most recently selected station can be heard (Last Station Memory).
Selecting the preset position
1
Select desired waveband (FM, MW or LW) with »
TUNER/ BAND
«.
2
Select the station position step by step with »
MEM
Ń Ľ
« on the device
or with »
5a
« and »
s6
« on the remote control.
– Display: for example, »CH
36
« and the frequency.
Stereo/mono reception
If the device is receiving an FM stereo station »
ɳ
« appears in the display.
However, if the signal from the FM stereo station is weak, you can improve
the sound quality by switching to mono reception.
1
Press »
FM MODE
« on the remote control to switch to mono reception.
– Display: »
ɳ
« disappears.
2
To switch back to FM stereo press »
FM MODE
« on the remote control.
– Display: »
ɳ
«.
– If the device is set to stereo reception and is receiving a mono signal,
the »
ɳ
« display flashes.
Automatic station search (ASP)
By starting the automatic station search, you can delete all the existing preset
stations and at the same time allocate new radio stations to them.
1
Start the automatic search in tuner mode by pressing and holding down
»
PROGRAM/PROG.
«.
– After the search has finished, the station stored in position 01 can be
heard.
Note:
The automatic station search can be interrupted with »
PROGRAM/
PROG.
«.
TUNER MODE
_______________________________________
FLAT
CH
37
FM
100.6
MHz
ɳ
TUNER
FLAT
CH
37
FM
100.6
MHz
ɳ
TUNER
FLAT
CH
36
FM
107.4
MHz
ɳ
TUNER
