Grundig GTN 482617 GCH, User Instructions

Page: 82 / 92

82
7. While establishing a connection,
the connection symbol
flash and “Connecting ...”
appear on the screen. When the
connection is established, the
connection symbol sis lit up
continuously and “Connected”
appears on the screen.
8. When you have completed the
setup, you can exit the settings
menu by pressing the Anti-
creasing / Menu entry button for
3 seconds.
C
Repeat the initial setup
steps if the wireless network
name or password changes.
Wireless Network Connection Setting:
You can turn the wireless network
connection of your HomeWhiz-
installed machine on or off without
having to re-install it.
1. Enter the settings menu.
2. Find “ Wireless Connection ” by
using the buttons to the right and left
of HomeWhiz.
3. You can turn it on and off by
pressing
HomeWhiz
button.
The symbol on the screen
indicates wireless connection
status.
Your machine is connected to the
network when xxx is on; it is being
connected when the symbol is
flashing and not connected when the
symbol is off.
A
When “Wireless Connection:
On“ on your machine,
HomeWhiz
function
can be selected. Check
the network connection
status if it is not possible
to select
HomeWhiz
function. If connection is
not established, repeat the
initial setup settings over
the machine.
A
If the wireless network
name or password of your
machine changes, repeat
the initial setup steps.
7.2 Usage of HomeWhiz Function:
To remotely control your HomeWhiz
setup, Ensure that your machine
is turned on and the door is closed
and you must activate the function
by pressing the HomeWhiz button.
As long as
HomeWhiz
function is
enabled, you can use all the settings
and operations you can perform via
the control panel of your machine via
HomeWhiz application.