Grundig GTN 482617 GCH, User Instructions

Page: 73 / 92

73
RO
EN
Water tank
When the program is completed, the
warning symbol to empty the water
tank turns on.
If the water tank fills up while the
program continues, the warning
symbol starts flashing and the
machine goes into stand-by. In this
case, empty the water tank and start
the program by pressing the
Start
/ Stand-by button. Warning symbol
turns off and program resumes.
Cleaning the filter drawer
Warning symbol flashes periodically
to remind that filter drawer must be
cleaned.
Loading cover is open
Following warnings are displayed
respectively if the loading cover of the
drying machine is open.
Door is open
Program Paused
Delay Setting
You can delay the end time of the
program up to 24 hours with the
Delay Setting
function.
Open the loading door and place the
laundry.
Select drying program, spin cycle and
if needed, additional functions.
Press the Delay Setting selection
button and set the delay time you
wish. Delay Setting symbol turns
on. (When the button is pressed and
hold pressed, Delay Setting proceeds
non-stop).
Press the Start / Stand-by button.
Delay Setting
countdown starts and
Delay Activated and Program Started
messages are displayed on the
screen. “:” Separator in the middle of
displayed delay time flashes.
Program Started
End Time Enabled
C
You can add or remove
laundry within delay time.
Delay Setting symbol
will turn off at the end of
countdown, drying starts
and duration of program is
displayed. Displayed time
is the sum of normal drying
time and delay time.