Grundig GTN 48250 GC, User Instructions

Page: 67 / 76

FL
67
EN
7.2 Cleaning the sensors
There are dampness sensors in the
machine that detect whether the
laundry is dry or not.
To clean the sensors:
1. Open the loading door of the
machine.
2. Allow the machine to cool down
if it is still hot due to the drying
process.
3. Wipe the metal surfaces of
the sensor with a soft cloth,
dampened with vinegar and dry
them.
C
Clean metal surfaces of the
sensors 4 times a year.
C
Do not use metal tools when
cleaning metal surfaces of
the sensors.
A
CAUTION: Never use
solvents, cleaning agents
or similar substances for
cleaning due to the risk of
fire and explosion!
7.3 Draining the water tank
Dampness of the laundry is removed
and condensed during drying process
and the water that arise accumulates
in the water tank. Drain the water
tank after each drying cycle.
A
CAUTION: Condensed water
is not drinkable!
A
CAUTION: Never remove
the water tank when the
program is running!
If you forget to drain the water tank,
the machine will stop during the
subsequent drying cycles when the
water tank is full and the Water Tank
warning symbol will flash. If this is
the case, drain the water tank and
press
Start / Pause button to resume
the drying cycle.
To drain the water tank:
1. Pull the drawer and remove the
water tank carefully.
2. Drain the water in the tank.