Grundig GTN 48250 GC, User Instructions

Page: 65 / 76

FL
65
EN
C
If you select a new
programme by turning
the Programme Selection
knob while your machine
is in Pause mode, then the
current program is aborted
and new programme
information is displayed.
CAUTION: Do not touch the
inner surface of the drum
when adding or taking out
laundry while a programme
is running. Surfaces of the
drum are hot.
6.14 Canceling the programme
If you want to stop drying and cancel
the programme for any reason after
the machine has started to run, press
and hold the
On/Off/Cancel button
for 3 seconds.
A
CAUTION: As the inside
of the machine will be
excessively hot when you
cancel the program while
the machine is running,
activate the ventilation
program to cool it down.
6.15 End of programme
Lint Filter Cleaning and Water Tank
warning symbols light up in the
programme follow-up indicator and
“ Program Over” label appears on the
display when the programme comes
to an end. The loading door can be
opened and the machine becomes
ready for a second cycle.
Press On / Off / Cancel button to
switch off the machine.
Program Over
C
If Anti-creasing function
is activated and the
laundry is not taken
from the machine at the
end of the programme,
2-hours(changes subject
to selection) Anti-creasing
programme is activated.
C
Clean the lint filter after
each drying. (See "Lint
Filter and Loading Door
Inner Surface")
C
Drain the water tank at the
end of each drying. (See
"Draining the water tank")