Grundig GTN 48250 GC, User Instructions

Page: 62 / 76

62
adjustment button in this menu.
Save Settings warning is displayed;
when the
spin store adjustment
button is pressed again, factory
settings are restored and the display
exits the menu to return to the
programme selection display.
The setting is saved by pressing
and holding for 3 seconds the menu
access button and then it exits
the menu. User can operate the
machine by selecting the required
programme.
6.9 Warning symbols
C
Warning symbols may differ
according to the model of
your machine.
Lint filter cleaning
When the programme is completed,
a warning symbol will appear to
remind that the filter needs to be
cleaned.
C
If the Filter Cleaning
symbol is on continuously,
refer to “Troubleshooting”
section.
Water tank
When the programme is completed,
a warning symbol will appear to
remind that the water tank needs to
be drained.
If the water tank becomes full while
the programme is running, the
warning symbol will start to flash
and machine will pause. Drain the
water in the water tank and press
Start / Pause button to resume the
programme. The warning symbol
turns off and the programme
resumes operating.
Cleaning the filter drawer
Warning symbol flashes with certain
intervals to remind that the filter
drawer needs to be cleaned.
Loading door open
Following warnings light alternately
when the loading door of the dryer is
open.
Door is open
Program Paused
End Time Setting
End Time Setting function allows
you to delay the ending time of the
programme up to 24 hours.
1. Open the loading door and put the
laundry in.
2. Select the drying programme,
spin speed and, if required, the
auxiliary functions.
3. Press End Time Setting selection
button to set the desired End
Time. End Time Setting symbol
lights up on the display.(When the
button is pressed and hold, End
Time proceeds uninterruptedly).