background image

29

EN

7.2 Cleaning the sensor 

There are dampness sensors in the 

dryer that detect whether the laundry 

is dry or not.

To clean the sensors:

•  Open the loading doorof the dryer.

•  Allow the machine to cool down 

if it is still hot due to the drying 

process.

•  Wipe the metal surfaces of 

the sensor with a soft cloth, 

dampened with vinegar and dry 

them.

C

Clean metal surfaces of the 

sensors 4 times a year.

C

Do not use metal tools when 

cleaning metal surfaces of 

the sensors.

A

Never use solvents, 

cleaning agents or similar 

substances for cleaning 

due to the risk of fire and 

explosion! 

7.3 Draining the water tank

Dampness of the laundry is removed 

and condensed during drying process 

and the water that arise accumulates 

in the water tank. Drain the water 

tank after each drying cycle.

A

Condensed water is not 

drinkable!

A

Never remove the water 

tank when the program is 

running!

If you forget to drain the water tank, 

the machine will stop during the 

subsequent drying cycles when the 

water tank is full and the Water Tank 

warning symbol will flash. If this is 

the case, drain the water tank and 

press

 Start / Pause

 

button to resume 

the drying cycle.

To drain the water tank:

•  Pull the drawer and remove the 

water tank carefully.

•  Drain the water in the tank.

•  If there is lint accumulation in the 

funnel of the water tank, clean it 

under running water. 

•  Place the water tank into its seat. 

C

If the direct water draining 

is used as an option, there 

is no need to empty the 

water tank.

Summary of Contents for GTN 39250 GCW









































Reviews: