15
EN
1
3
4
2
A
Hose connection should be
made in a safe manner. Your
drain house will be flooded
if the hose comes out of
its housing during water
discharge.
C
Water drain hose should
be attached to a height of
maximum 100 cm.
C
Make sure that the water
drain hose is not stepped on
and it is not folded between
the drain and the machine.
4.4 Adjusting the feet
• In order to ensure that the dryer
operates more silently and
vibration-free, it must stand level
and balanced on its feet. Balance
the machine by adjusting the feet.
• Turn the feet to left or right until
the dryer stands level and firmly.
C
Never unscrew the
adjustable feet from their
housings.
A
Check that no part of
the transportation safety
assembly remains inside
the drum.
4.3 Connecting to the drain
In products equipped with condenser
unit, water accumulates in the water
tank during the drying cycle. You
should drain accumulated water
after each drying cycle.
You can directly drain accumulated
water through the water drain hose
supplied with the product instead
of periodically draining the water
collected in the water tank.
Please refer to the detailed
instructions supplied with the
accessories pack.
Connecting the water drain hose
1-2
Pull hose at the behind of
the dryer by hand in order to
disconnect it from where it is
connected. Do not use any tools
to remove the hose.
3
Connect one end of the drain
hose supplied with the dryer to
the connection point from where
you removed the hose of the
product in previous step.
4
Connect the other end of the
drain hose directly to the
wastewater drain or to the
washbasin.
