18
1. Fault Condition Indicator
This indicator (
) shall be active
when your refrigerator cannot
perform adequate cooling or in
case of any sensor error. “E” shall
be displayed on the Freezing
Compartment temperature
indicator and figures such as 1,2,3...
shall be displayed on the cooling
compartment temperature indicator.
These figures provide information to
the authorized service on the error
that has occurred.
Exclamation mark may be displayed
when you load warm food to the
freezing compartment or keep the
door open for a long period of time.
This is not a fault, this warning shall
be removed when the food is cooled
down or when any key is pressed.
2. Energy Saving (Display Off)
Indicator
Energy saving function is enabled
automatically and the energy saving
symbol () is displayed when the door
of the product is not opened or closed
for some period of time. When the
energy saving function is active, all
symbols on the screen other than
the energy saving symbol shall be
turned off. When the energy-saving
function is active, pressing any key
or opening the door will deactivate
the energy-saving function and the
display signals will return to normal.
The energy-saving function is an
active function at the factory defaults
and cannot be cancelled.
3. Wireless Key
When the key is pressed for
a long period (3 seconds), the
wireless connection symbol on
the display/screen flashes slowly
(with intervals of 0.5 seconds). The
home network is initialized on the
product this way.
After achieving wireless
connection with the product,
wireless connection symbol (
)
illuminates continuously.
When the initial connection is
established, you may activate/
deactivate the connection with
a short press on this key. The
wireless connection symbol
shall flash quickly (at 0.2 second
intervals) until the connection is
established. When the connection
is active, the wireless network
symbol shall light up continuously.
If the connection cannot be
established for a long period,
check your connection settings
and refer to the “Troubleshooting”
section provided in the user
manual.
HomeWhiz application shall be
used for wireless connection.
Installation steps are described on
the application during installation.
You may access the application
by reading the QR code available
on the HomeWhiz label on the
product. Application is offered
through App Store for IOS devices,
and through Play Store for Android
devices.
Visit https://www.homewhiz.com/
for detailed information.’
4. Freezing Compartment
Temperature Setting Key
Temperature setting is made for
cooler compartment. Pressing
this key will enable the freezer
compartment temperature to be
set at -15,-16,-18,-19,-20,-22,-24
Celcius.