13
TR
1.
To attach the wedges, remove
the screws on the product and
use the screws provided with
the wedges.
1.
Attach 2 plastic wedges on the
ventilation cover as shown in
the figure.
4.4 Adjustment of the feet
If the product is not in balanced
position, adjust the front adjustable
stands by rotating right or left.
4.5 Electrical connection
A
WARNING:
Do not
use extension or multi
sockets in power
connection.
B
WARNING:
Damaged
power cable must be
replaced by Authorized
Service.
•
Our firm will not assume
responsibility for any
damages due to usage
without earthing and power
connection in compliance
with national regulations.
•
The power cable plug must
be easily accessible after
installation.
C
Hot surface warning!
The side walls of your
product are equipped with
cooler pipes to enhance
the cooling system. High
pressure fluid may flow
through these surfaces,
and cause hot surfaces
on the side walls. This
is normal and it does
not require servicing. Be
careful when you contact
these areas.
