35/EN
display Cancel 3” ’, ‘ Cancel 2” ’, ‘
Cancel 1” ’
3. When the cancel process is initiated
“Cancelling...” message is displayed
on the Screen Info Line and when the
process is completed, “Cancelled”
message is displayed on the Screen
Info Line. The machine will carry on
required operations to cancel the
program for a few minutes.
After cancelling the program you can
select a new program and initiate it.
Based on the remaining steps of the
cancelled program, there may be
residue detergent or rinse aid on the
machine and/or the washed parts.
Changing the auxiliary function
After initiating the program, you have to
cancel the program in order to change the
auxiliary functions. Then you can select and
run the new program and functions.
Machine settings
To change the settings regarding “Water
Hardness”, “Sound Level”, “Brightness”,
“Language” and other additional functions,
you can use the “Settings menu”.
To enter settings menu
1. Press ON/OFF button to turn on the
machine.
2. To enter the settings menu, press
the arrow buttons and then enter the
Settings Menu screen.
3. When you go the Settings Menu
screen, press the “Select” button and
enter the Settings Menu
4. After entering “Settings Menu”, press
the arrow buttons on the screen to
switch between the settings.
5. Enter the menu that you want to
change the settings by pressing the
setting on the screen.
6. To exit the “Settings Menu” press Back
button.
Water Hardness setting
You are required to set the water hardness
level according to the hardness level of your
water supply with one of the levels below.
1. No scaling - Very low scaling
2. Low scaling
3. Medium scaling
4. High Scaling
5. Very High Scaling
Filter Cleaning
(Depends on the Model)
When you activate this function, you micro
filter will be cleaned with a special system at
the end of washing process and will be ready
to be used for the next cycle. The micro filter
cleaning period may be extended from 2
weeks to 3 months with this cleaning process
and it increases the washing performance.
For efficient use of this function, it is
recommended to be used at every washing
cycle.
This function contains two options as
“On” and “Off”. The factory default is
set as “Off”. When you want to use this
function, change the “Off” setting to “On”.
Interior Lighting
(Depends on the Model)
When this function is enabled, the interior
lighting will be on each time you open the
door of your machine. This function contains
two options as “On” and “Off”.
The factory default is set as “Off”.
Automatic Door Opening
(Depends on the Model)
When you activate this function, the door of
your machine is opened automatically at the
end of the washing cycle. This increases the
