33/EN
Express Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
TurboWash Function
(Depends on model)
This function operates the lower impeller
with a higher pressure and higher speed to
enable a better washing for dishes such as
pans and trays with stubborn, dried soiling.
Half Load function
(Depends on model)
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
While the function is active, the selection
indicator on the selected function key will
become on.
4. Close the door of the machine to start
the programme.
With the Half Load function you can
save both water and power while using
the lower and upper baskets of the
machine.
TrayMaster Function
(depends on the model)
Select Intensive 70°C programme and
press function key to run this function.
depending on the hardness level of the tap
water.
If you have used the Tablet features
during the last washing programme
you used, Tablet function will remain
active in the next washing programme
you will select.
Tablet Detergent function may cause
change in the programme duration.
Steam Shine Function
(Depends on model)
It provides superior drying performance.
Perfect Rinse Function
(Depends on model)
Depending on the type of the detergent
used, if a detergent dissolving issue is
encountered it will remove the resulting
stains from the dishes and enables the
optimum rinsing performance.
Tablet detergent function
(depends on model)
Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one detergents
such as 2in1, 3in1, 4in1, 5in1 and etc.,
Programming the washing
period
Snooze
If economic electric tariffs are utilized
in your region, you can use the snooze
function to wash your dishes at appropriate
hours.
You can snooze the program start up to 24
hours. The snooze function cannot be used
after the program starts.
1. After selecting the washing program
and other extra functions, press the
program period selected.
2. “0:00” will be shown on the Screen
Info Line and Snooze period can be
selected.
3. Each time you press the + and -
buttons on the left and right side of the
screen, the period can be adjusted in
30 minute increments up to 6 hours
and then up to 24 hours with 1 hour
increments.
To add additional functions to the
programme:
Use the HomeWhiz application to add
additional functions to your programme.
