background image

18/EN

3.  Push the lid of the detergent dispenser 

to close it. A "click" will be heard when 

the lid is closed.

1

2

3

 Use powder or liquid/gel detergent in 

short programmes without prewash 

since the solubility of the tablet 

detergent changes depending on the 

temperature and time.

the manufacturer of the detergent for 

further questions.

 Do not put solvents into the detergent 

dispenser. There is the risk of 

explosion!

Put the detergent into the detergent 

dispenser just before operating the 

machine as illustrated below.

1.  Push the latch to right to open the 

detergent dispenser lid (A). (depends 

on model)

2.  Put suggested amount of powder, 

liquid/gel or tablet detergent in the 

reservoir.

 Inside the detergent dispenser there 

are level markings that help you 

use appropriate amount of powder 

detergent. When brimful, detergent 

dispenser will contain 45 cm³ of 

detergent. Fill detergent up to 15 cm³ 

or 25 cm³ level marks in the detergent 

dispenser according to fullness of the 

machine and/or soiling degree of the 

dishes. One tablet is enough if you are 

using detergent tablets.

Summary of Contents for GNFP5540DWA


















































Reviews: