Allgemeiner Teil / General Section
PA 6
1 - 30
GRUNDIG Service
ENGLISH
29
TUNER MODE
_____________________________________________________________________________
RDS reception
Changing the HiFi system display
1
To switch the display press »
i
« repeatedly.
– The display will show, in the following order: the RDS time, Radiotext, the
frequency and the name of the station.
RDS programme service
RDS stations in the VHF (FM) frequency band also transmit their station names.
RDS time
Some RDS stations transmit RDS time information.
1
To call up the RDS time information, keep pressing »
i
« until the RDS time is
displayed.
Note:
The time display is updated every minute. The accuracy depends on the
information transmitted by the station itself. You must be tuned to the RDS
station for several minutes before the time information can be transmitted.
If no time information is transmitted, Radiotext will appear.
Radiotext
Some RDS stations transmit information known as Radiotext. This is additional
information about the station and its programmes. Radiotext appears as a ticker
in the display. As this information is transmitted character by character, it may
take some time before the text is received in full.
1
To call up Radiotext, keep pressing »
i
« until the information is displayed.
Note:
If reception is poor there may be gaps in the Radiotext message.
15 : 00
I BAYERN 3
MUSIK NEWS UND
32
CD MODE
___________________________________________________________________________
Basic CD mode functions
General information about CDs
Always hold CDs by the edge in order to avoid damaging them.
Replace CDs in their jewel cases after use.
Do not attach adhesive labels to CDs.
Keep the surfaces of CDs clean.
To clean CDs use a lint-free cloth and wipe them in a straight line from the centre
of the disc outwards. Do not use cleaning fluid for vinyl records or other solvents
or scouring agents.
Selecting the CD player as the source
1
Select the input source by pressing »
CD
« on the remote control,
or
press »
SOURCE
« on the top side of the HiFi until »
CD
« is shown in the
display.
– The display shows »
CD
«, then »
&
« followed by information on the CD.
– If there is no CD in the CD compartment, »
NO DISC DI
« appears in the
display.
Inserting a CD
Normal 12 cm CDs as well as 8 cm CDs can be played back. An adapter is
not necessary.
Do not put more than one CD in the compartment.
1
Open the CD compartment (1 to 3) by pressing the corresponding
»
DISC OPEN/CLOSE
« button on the HiFi.
– The CD compartment opens and the display reads: »
OPEN
«.
14 40 : 45 D I
NO DISC D I
OPEN
12 cm
8 cm
ENGLISH
33
CD MODE
____________________________________________________________________________________
2
Place the CD in the compartment with the label facing upwards.
3
Press »
DISC OPEN/CLOSE
« on the HiFi to close the CD compartment.
– The CD compartment closes, the display shows: »
CLOSing
«.
– The HiFi reads the contents of the CD and the message: »
READING D I
«
appears in the display.
– CDs with CD Text will show the name of the album, while CDs without CD
Text will display the number of tracks, the total playing time and the
selected CD compartment.
Note:
You can also close the CD compartment by pressing »
4
PAUSE
«.
Playback begins automatically.
The yellow indicators in the »
DISC SELECT
« buttons on the HiFi
indicate: dimly lit, a CD has been inserted; brightly lit, the compartment was
selected.
CD playback
1
Select the desired CD compartment (1 to 3) by pressing »
DISC
« on the
remote control
or
select the desired CD compartment (1 to 3) by pressing »
DISC SELECT 1
«,
»
DISC SELECT 2
« or »
DISC SELECT 3
« on the HiFi.
2
Press »
4
PAUSE
« to start playback.
– Playback begins with the first track and the display shows the current track
number and the expired playback time of the track, or for CDs with CD
Text the name of the track.
– Playback stops automatically at the end of the CD.
Note:
If all CD compartments are occupied, the system will select the next CD and
will continue playback.
3
To pause playback, press »
4
PAUSE
«.
To resume playback, press »
4
PAUSE
« again.
4
To end playback, press »
5
«.
closing
reading d 1
1 00 : 00 D I
34
CD MODE
____________________________________________________________________________________
Selecting a particular track
1
Keep pressing »
1
« or »
2
« until you see the number or name of the required
track in the display.
– Playback of the selected track starts automatically.
Repeating the current track
1
Press »
1
« during playback.
– The track is played back from the beginning.
Searching for a passage
1
During playback, press »
9
« or »
8
« until the desired passage has been
found.
Playback begins as soon as you let go of the »
9
« or »
8
« button.
Note:
During the search the volume is reduced.
6 00 : 00 D I
5 00 : 00 D I
5 0 1 : 35 D I
