Grundig GKR2020, Manual

Page: 41 / 59

41­
ENGLISH
TIMER­MODE
­--------------------------------------------------------------------------------------------------------------------------
Interrupting­the­alarm
1
Press »
S
« while the alarm is sounding.
– Display: » « flash.
– The alarm (signal tone or radio) stops.
Note:
7
The alarm will sound again depending on
how often a button has been pressed (1
time = after 5 minutes, 2 times = 10 min-
utes, 3 times = 15 minutes, 4 times = 30
minutes. The total alarm time in 90 minutes.
Cancelling­alarm­stand-by
1 While the timer is sounding, press » ON/
OFF «.
– If the timer is set to »Once«, the timer signal
stops and » « disappears.
– If the timer is set to »Daily«, »Weekends« or
»Weekdays«, the timer signal stops and
»
« appear for the next day.
Activating­and­deactivating­the­timer
1 Open the menu »Alarm« using » AL1 « and
» AL2 « on the remote control.
– The »Alarm« menu appears.
2 Select the option »Enable« with » « or » «
and press » OK « to confirm.
3
To deactivate »Alarm 1« or »Alarm 2«, select
»Off« with » « or » « and press » OK « to
confirm.
4
Select the option »Save« with »
V
« or »
Λ
«
and press » OK « to confirm.
– The Timer is deactivated.
Note:
7
To activate the alarm time, reselect the
alarm cycle in the »Cycle« menu and store
it.
Sleep­timer
Setting­the­sleep­timer
By using the button » S/N «
1
Switch on the device by pressing » 8 « on the
remote control or » ON/OFF « on the device-
and select the preferred sound source.
2
Open the sleep menu with »
S/N
« on the
remote control.
3 To set the switch-off time from »15« till »120«,
press »
S/N
« on the remote control repeat-
edly.
– Display: »
« and the switch-off time ap-
pears.
– After the selected time has elapsed
» Going to sleep…« appears, and the
device switches off, » « disappears.
By using the Menu
1­ Switch on the device by pressing »
8
« on the
remote control or » ON/OFF « on the device.
2
Press »
MENU
«, select the »Main menu« with
» « or » « and press » OK « to confirm.
3 Select the option »Sleep« with » « or » «
and press »
OK
« to confirm.
4­ To set the switch-off time from »15« till »120«,
press » « or » « and press »
OK « to con-
firm.
– Display: »
« and the switch-off time ap-
pear.
– After the selected time has elapsed
» Going to sleep…« appears, and the
device switches off, » « disappears.
Cancelling­the­sleep­timer
1
To switch off the sleep timer before the set
switch-off time, refer to previous section and
select »Sleep off« at step 3;
or
switch the device to standby mode by press-
ing » 8 « on the remote control or » ON/OFF «
on the device.