17
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
7
If the network name (SSID) is suppressed
on the WLAN router for security reasons,
the network cannot be found. It must then
be entered manually. Select the option
»[Manual config]« with » « or » « and
press »
OK
« to confirm. Continue with the
chapter “Special Settings” – “Registering
the device ...”, on page 43.
10
Select your wireless [WPS] network with
» « or » « and press »
OK
« to confirm.
Note:
7
There are two options for logging on to
a [WPS] network: using the push button
on the router or by entering a PIN on the
router.
11
Select the option »Push-Button« with » « or
» « and press »
OK
« to confirm.
Activate the »Push Button« function on the
router (menu or button) and press »
OK
« on
the device within 2 minutes.
– Display: »Please wait, connecting« and
then »Connected«.
End setting with »
OK
« on the device;
or
12
Select the option »PIN« with » « or » «
and press »
OK
« to confirm.
– Display: PIN number that specifies the
device.
Enter the PIN number in the router menu and
confirm.
– Display: »Please wait, connecting« and
then »Connected«.
13
Select your wireless network (SSID) with» «
or » « and press »
OK
« to confirm.
– Key menu opens, the cursor is positioned
in the first input position.
Time/Date
Key:
0123456789._–@,
abcdefghijklmn
opqrstuvwxyzABC
DEFGHIJKLMNOPQR
BKSP
OK
CANCEL
Note:
7
If the network is encrypted, the network
key (security code WEP or WPA) must be
entered.
14
Enter your wireless security code:
Select the first character (capital and small
letters, numbers, symbols) with » «, » «,
» « or » « and press »
OK
« to confirm.
Repeat the procedure for all characters.
After you finish entering all characters, se-
lect the push button »OK« with » «, » «,
» « or » « and press »
OK
« to confirm.
– The menu »Internet Setup« appears, the
network registration is processed.
– Display: »Please wait, Connecting« and
then »Connected«.
– After successful registration, the message
»Setup wizard completed« appears.
Notes:
7
You can choose between numbers, lower
and upper case letters, and special charac-
ters.
7
Press » « or » « to scroll through the
menu pages (numbers, letters, special char-
acters, etc.).
7
If you make a mistake during entry, press
» «, » «, » « or » « to select the push
button »BKSP« and press »
OK
« to confirm.
The last character is deleted.
7
If you wish to exit the menu prematurely,
press » «, » «, » « or » « to select the
push button »CANCEL« and press »
OK
«
to confirm.
15
Press »
OK
« to end the setting.
