Grundig GKNE 5050, Manual

Page: 54 / 82

11
TR
3. Installation
To make the product ready for
use, make sure that the electricity
installation is appropriate before
calling the Authorised Service
Agent. If not, call a qualified
electrician to have any necessary
arrangements carried out.
C
Preparation of
the location and
electrical installation
at the place of
installation is
under customer's
responsibility.
B
Product must
not be plugged in
during installation.
Otherwise, there is
the risk of death or
serious injury!
B
WARNING:
Manufacturer shall
not be held liable
for damages that
may arise from
procedures carried
out by unauthorised
persons.
A
WARNING:
Prior to
installation, visually
check if the product
has any defects on it.
If so, do not have it
installed. Damaged
products cause risks
for your safety.
C
Make sure that the
power cable is not
pinched or crushed
while pushing the
product into its place
after installation or
cleaning procedures.
3.1 Appropriate
installation location
A
WARNING:
If the
door of the room
where the product
will be placed is too
small for the product
to pass, then the
product's doors must
be removed and the
product must be
turned aside to pass it
through.
•
Choose a place at where
you would use the product
comfortably.
•
Install the product at least 30
cm away from heat sources
such as hobs, ovens, heater
cores and stoves and at least 5
cm away from electrical ovens.
Product must not be subjected
to direct sun light and kept in
humid places after installation.
•
Appropriate air ventilation must
be provided around your product
in order to achieve an efficient
operation.If the product is to be
placed in a recess in the wall,
pay attention to leave at least 5
cm distance with the ceiling and
side walls.
•
Do not place the product on
the materials such as rugs or
carpets.