Grundig GKNE 5050, Manual

Page: 57 / 82

14
3.6 Connecting of the
water hose to the cold
water mains line
(in some models)
If you will use the refrigerator by
connecting it to the cold water
mains line, you must install a
standard 1/2” valve connector to
the cold water installation of your
home. If this valve is not present
or you are not sure, consult a
qualified plumber.
1.Separate the union from the tap
adaptor.
2.Install the tap adaptor to
standard 1/2” valve connector.
3.After inserting the water hose
to the union, install it to the tap
adaptor and insert to the union to
the tap adapter.
4.Tighten the union by hand.
WARNING:
Secure the water hose
to suitable points by means of the
clips supplied to avoid any damage
or displacement or accidental
disconnection.
WARNING:
After turning on the
water valve, make sure that there
is no leakage at both connection
points of the water hose. If there
is a leakage, turn off the valve
immediately and tighten all joints
again using a spanner or a pliers.
WARNING:
Make sure that
standard 1/2” valve connector is
available and completely turned off
on your cold water mains line.