EN / 36
Do not remove the knobs and gaskets
underneath to clean the panel. The con-
trol panel and knobs may be damaged.
• While cleaning the inox panels with knob
control, do not use inox cleaning agents
around the knob. The indicators around
the knob can be erased.
• Clean the touch control panels with a
damp soft cloth and dry with a dry cloth.
If your product has a key lock feature, set
the key lock before performing control
panel cleaning. Otherwise, incorrect de-
tection may occur on the keys.
7.4 Cleaning the inside of the oven
(cooking area)
Follow the cleaning steps described in the
"General Cleaning Information" [
tion according to the surface types in your
oven.
Cleaning the side walls of the oven
The side walls in the cooking area can only
be covered with enamel or catalytic walls.
It varies by model. If there is a catalytic
wall, refer to the
section for information.
If your product is a wire shelf model, re-
move the wire shelves before cleaning the
side walls. Then complete the cleaning as
described in the
wall surface type.
To remove the side wire shelves:
a. Remove the front of the wire shelf by
pulling it on the side wall in the oppos-
ite direction.
b. Pull the wire shelf towards you to re-
move it completely.
c. To reattach the shelves, the procedures
applied when removing them must be
repeated from the end to the beginning,
respectively.
7.5 Easy Steam Cleaning
This allows cleaning of the dirt (not re-
maining for a long time) that is softened by
the steam inside the oven and by the water
droplets condensed in the internal sur-
faces of the oven easily.
a. Remove all accessories inside the oven.
b. Add 500 ml water into the tray and
place it on the 2nd shelf of the oven.
c. Select the easy steam cleaning func-
tion. The cleaning time appears on the
display and this duration cannot be
changed.
Open the door and wipe the oven interiors
with a wet sponge or cloth.
