34
your call may be cut off.
Check the Batteries Level symbol on the display. If it is low,
•
recharge the batteries.
The Caller Display feature isn’t working.
You need to subscribe to the Caller Display feature from your
•
service provider.
The caller may have withheld their number, or they may be calling
•
from a network that does not transmit the Caller ID (for example, it
may be an international call).
The handset’s batteries are running low within an hour or two.
•
Before you used the handset for the first time, you should have left
•
it on the base unit for up to 15 hours to charge the batteries fully.
You may need to replace the batteries.
•
I cannot transfer a call.
Make sure the other handset is within range of the base unit, and
•
is not busy on a call.
Make sure you are keying in the correct number for the other
•
handset.
No display on LCD screen.
Make sure the batteries have power.
•
I cannot register handset to base
Make sure the number of handset registered to base is less than 4
•
Check that the base unit is not near other electrical equipment,
•
such as TV or computer
TROUBLESHOOTING
TECHNICAL DETAILS
Full DECT GAP Compatible system
Standard
Digital Enhanced Cordless
Telecommunications(DECT)
Frequency range
1.8 GHz 2.4 GHz
Channel bandwidth
1.728 MHz
Modulation
GFSK
Operating range
Up to 300 m outdoors;
Up to 50 m indoors
Operating time
Standby time: 120 hours
Talking time: 8 hours
Note: The above mentioned ranges are maximum values. The range
shortens depending on environmental conditions and obstacles between
base and handset.
