8
THE HANDSET AND BASE UNIT AT A GLANCE
HOW TO INSTALL THE BASE
you put it, press it again to stop the handset ringing.
9 Network Light
The Network light comes on when you have a connection to the
Ethernet.
10 In Use Light
The IN USE light comes on when you place calls.
11 Charge Light
The CHARGE light comes on when the handset’s batteries are being
charged.
Connect
1.
on the base to a LAN
(Local Area Network) port on your
broadband connection (modern,
router, hub, switch etc.) using the
provided Ethernet cable.
Connect the power adapter to an
2.
active power outlet and connect
the power port on the base to the
power adapter (9V, 500 mA).
Connect
3.
on the base to a telephone socket (if available) using
the provided telephone cable.
How to Install the Handset
Push the top of the battery com
-
1.
partment cover on the back of the
handset downwards.
Insert the two batteries provided
2.
with the handset making sure that
their plus and minus ends are fac
-
ing the same way as shown in the
illustrations on the sides of the bat
-
tery compartment.
Slide the battery compartment
3.
cover shut.
