EN
GLISH
17
CONNECTION AND PREPARATION
__
Connecting an audio system with analogue
two-channel stereo sound
1
Plug a standard RCA cable into the »
AUDIO OUT ANA-
LOGUE L R
« sockets on the DVD player and into the corre-
sponding sockets on the audio system.
Caution:
Do not connect the »
AUDIO OUT ANALOGUE L R
«
sockets on the DVD player to the PHONO (record player)
input sockets on the audio system.
Connecting the power cord
1
Plug the power cord into the wall socket.
Note:
Only plug the device into the mains socket after you have con-
nected the external devices.
Inserting batteries in the remote control
1
To open the battery compartment, press the catch and remove
the lid.
2
When inserting the batteries (for example, R06 or AA,
2 x 1.5 V) observe the polarity marked in the battery com-
partment.
3
Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control
commands, the batteries may be flat. Always remove used bat-
teries. The manufacturer accepts no liability for damage caused
by leaking batteries.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always dis-
pose of used batteries in accordance with local environmental
regulations.
Summary of Contents for GDP 3800
Page 1: ...DVD PLAYER GDP 3800 ...
