ENGLISH
13
Connecting a multi-channel amplifier or digital
two channel audio system
The digital multi-channel sound of a DVD can best be decoded and
played back with a multi-channel audio/video amplifier (Dolby*
digital decoder or DTS).
1
Plug a standard cinch cable into the »
DIGITAL AUDIO
OUT
« socket on the DVD player and into the appropriate
socket on the digital multi-channel amplifier
or
remove the protective cap of the optical digital output and plug
an optical digital cable into the digital output »
DIGITAL
AUDIO OUT
« of the DVD player and into the corresponding
socket of the digital multi-channel amplifier.
Notes:
Keep the protective cap in a safe place and put it back in place
on the device if it is not to be used for a longer period of time.
Even if you are using a digital connection, you should still make
an analogue audio connection as it is possible, depending on
the disc type, that no signal can be output via the »
DIGITAL
AUDIO OUT
« socket (For the connection, see page 14).
* Manufactured under licence from Dolby Laboratories Licensing Corporation.
”Dolby”, ”Dolby Pro Logic”, ”Dolby Digital” and the double-D symbol ”
ij
” are tra-
demarks of the Dolby Laboratories Licensing Corporation. Copyright 1992 Dolby
Laboratories, Inc. All rights reserved.
CONNECTION AND PREPARATION
_
OPTICAL
DIGITAL
INPUT
DIGITAL
AUDIO
INPUT
EURO AV
TV
110-240 V
~
50/60 Hz 10 W
DIGITAL AUDIO OUT
AUDIO OUT
L
R
VIDEO OUT
S VIDEO OUT
EURO AV
TV
DIGITAL AUDIO OUT
AUDIO OUT
L
R
VIDEO OUT
S VIDEO OUT
Optional
