ENGLISH
13
Connecting a digital multi-channel amplifier
The digital multi-channel sound of a DVD can best be decoded and played with
a multi-channel audio/video amplifier (Dolby* digital decoder or DTS).
1
Plug a standard cinch cable into the »
Digital Audio Coaxial
« socket
on the DVD player and into the corresponding socket on the digital multi-
channel amplifier.
*
Manufactured under licence from Dolby Laboratories Licensing Corporation. ”Dolby”, ”Dolby
Pro Logic”, ”Dolby Digital” and the double-D symbol ”
ij
” are trademarks of the Dolby Labo-
ratories Licensing Corporation. Copyright 1992 Dolby Laboratories, Inc. All rights reserved.
Connecting the power cord
1
Insert the power cord plug into the socket.
Inserting batteries in the remote control
1
Open the battery compartment by pressing the snap-catch, and remove
the lid.
2
When inserting the batteries (Micro type, e.g. R 03 or AAA, 2 x 1.5 V),
observe the polarity marked on the battery compartment.
3
Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control commands, the
batteries may be flat. Always remove flat batteries. No liability is accepted
for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, may not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations which
apply in your area.
CONNECTION AND PREPARATION
_______________________________________
Video
Down Mix Audio
V
R
L
S-Video
Coaxial
Digital Audio
Bitstream/LPCM
Video
Down Mix Audio
V
R
L
S-Video
Coaxial
Digital Audio
Bitstream/LPCM
220-240V AC
~50/60Hz
SCART
VIDEO / Down Mix Audio / RGB
DIGITAL
AUDIO
INPUT
220-240V AC
~50/60Hz
