background image

GCR001IP 

 

5

SOME DO'S AND DONT'S ON THE SAFE USE OF EQUIPMENT 
WARNING:

 

 

This equipment has been designed and manufactured to meet safety 
standards but like any electrical equipment, care must be taken if you 
are to obtain the best results and safety is to be assured. 

  Do read the operating instructions before you attempt to use 

the equipment.   

  Do ensure that all electrical connections (Including the mains plug, 

extension leads and interconnections between pieces of 
equipment) are properly made in accordance with the 
manufacturer's instructions. Switch off and withdraw the mains 
plug when making or changing connections. 

  Contact the Grundig helpline if you are ever in doubt of the 

installation, operating, or safety of your equipment. 

  Don't continue to operate  the equipment if you are in any doubt 

about it working normally, or if it is damaged in any way - switch 
off, withdraw the mains plug and call the helpline. 

  Don't remove any fixed covers as this may expose dangerous 

voltages. 

  Don't leave equipment switched on when it is unattended unless it 

is specifically stated that it is designed for unattended operation or 
has a standby mode. Special arrangements may need to be made 
for infirm or handicapped people. 

  Don't listen to your headphones at high volume, as such use can 

permanently damage your hearing. 

  Don't obstruct the ventilation of the equipment, for example with 

curtains or soft furnishings. 

  Overheating will cause damage and shorten the life of the equipment. 

Don't allow electrical equipment to be exposed to rain or moisture.   

 

Above all

 

  Never let anyone, especially children, push anything into holes, 

slots or any other opening as this could result in a fatal electric 
shock. 

  Never guess or take chances with electrical 

equipment of any kind. It is better to be safe than sorry! 

 
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, 
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE 
ENCLOSURE, DO NOT OPEN THE CABINET, REFER SERVICING 
TO QUALIFIED PERSONNEL ONLY. 

Summary of Contents for GCR001IP














Reviews: