GCR001IP
10
Listening to the Radio
1. Press the
POWER
button to turn on the radio.
2. Press
PLAY/PAUSE/BAND
button to select the desired band FM or
AM.
3. Press
the
TUNE -/+
button to tune to the desired station. Hold
TUNE -/+
button to auto search for stations.
4. Press
VOL -/+
button to select the desired volume level (00-40).
Notes:
•
For FM reception, fully extend the wire “T” aerial and form a “T” shape until the
best results are achieved.
•
For AM reception, there is a ferrite rod aerial inside the unit, rotate or move the
unit’s position until the best results are achieved.
Saving the Station
1. You can store a total of 30 memory stations (20xFM, 10xAM).
2. Press
POWER
to turn on the radio.
3. Press
FUNCTION
button to select RADIO.
4. Press
BAND
button to select your desired band AM or FM.
5. Press
SELECT
button,
MEM
flashes then press
MEM -/+
to
select the station number.
6. Press
SELECT
button again to confirm. This station is now
saved in the memory.
Selecting Programmed Station
1. Turn on the radio, press the
FUNCTION
button to select RADIO.
2. Press
BAND
button to select the desired band.
3. Press
MEM -/+
button to select the desired station.
4. The display shows the band and the frequency.
Note
:
When there are no memorized stations the LCD display will show ‘Empty Preset.’
AUX IN Operation
The unit can be connected to another sound source via the Aux In socket.
1. Press the
POWER
button to turn on the radio.
2. Repeatedly press
FUNCTION
button until the AUX is displayed on
the LCD.
3. Connect the plug to the AUX IN socket on the back of the radio.
4. Press
VOL -/+
to adjust the desired volume level.
Note
:
In AUX IN mode, only
VOL -/+
and
POWER
buttons are available.
