11.2. Cruise
The Motordome Camera supports up to eight Cruise Paths. Please follow the instructions below for the setup of a
Cruise Path.
Cruise Setting :
To set up a Cruise Path, please first select a path number from the drop-down list. Then move the cursor to the
live view pane, and move the camera to a desired view (via PTZ controls) as the start point of a Cruise Path. Press
the “Set” button next to the menu item “Record Start” and start programming the Cruise Path via PTZ controls.
When finishing programming, press the “Set” button next to the menu item “Record End” to quit. Then this Cruise
Path will be automatically recorded.
Cruise Run :
Select the specified Cruise Path from the drop-down list, press the “Run” button, and then the camera will start
touring around as set.
To view the camera touring around in full screen mode, please move the cursor onto the live view pane, right-
click and click on “full screen” to select the full screen view. Then users can view the camera navigation in full
screen.
To move back to normal view, please right-click again on the image and click on "Normal View". The camera will
move back to Normal View.
To stop a running Cruise Path, simply move the cursor to the live view pane, right-click, hold the click and drag
the camera in any direction.
72
English
Summary of Contents for GCI-C0745P-1
Page 2: ......
