Grundig GCA-C2357V, Owner'S Manual

Page: 14 / 23

FDNR COLOR [0~10] :
If FDNR MODE is set to MANUAL, you can set here the colour level of FDNR from 0 to
10.
FDNR EDGE [0~10] :
If FDNR MODE is set to MANUAL, you can set here the edge enhancement of FDNR
from 0 to 10.
NOTE:
If the 3DNR function is used, the cancellation of the noise will be excellent. The higher
the compensation proportion is raised, the better the effect of noise cancellation will be,
but a ghost effect may also occurr.
6.7. IMAGE ADJ
This function is used to adjust the picture that is displayed on the screen.
FREEZE [OFF, ON] :
The FREEZE function allows to hold the
image of the camera.
REVERSE [OFF, H-REV, HV-REV, V-REV]:
Mirrors the video signal horizontally,
vertically, or both.
NEGATIVE [OFF, ON] :
This function is used to invert the colours in the picture.
SHARPNESS [0~31] :
This function is used to adjust the sharpness of the displayed image.
MONITOR:
Here you can adjust a few settings regarding the monitor you use.
When selecting
↵ , the following submenu will appear.
12 English